You're on 3DFinder
We search Thingiverse, MakerWorld, and Printables at once so you get the best of each.
Description
This remix offers a set of drawers with a height of 20mm and 40mm and both a width of ~19 cm. You can choose between thin walls (0.8mm) that are easy to print but a little wobbly and sturdier walls that are 1mm wide but require some special slicer settings. Additionally a version with a height of 20mm but only with a width of 16cm.
The shelves for the drawers are identical for the 0.8mm and 1mm variants.
The abbreviations for the file names are FB = FrontToBack divider, LR = LeftToRight divider. The narrow ones are named with 20s.
Settings
I print the 1mm variant with PLA with following Cura-Slicer-settings:
Layer height: 0.3 Init. Layer height: 0.2 Line Width: 0.53 Initial Layer Line Width: 60%
Wall thickness: 1.06mm Wall Line count: 2 Optimize Wall Print order: Off Compensate Wall overlaps:Off Fill gaps between walls: Everywhere Filter Out tiny gaps:ON
Infill: 10% (Gyroid)
Nozzle-Temp:215C Bed Temp:40C Flow:90%
Infill speed: 60mm/s Wall speed: 50mm/s Top/Btm Speed:60mm/s Init. layer speed: 50mm/s
Retraction distance:6mm Retraction Speed:40mm/s Retraction extra prime amount: 1mm³ (Without I got under extrusion after a retraction and a long travel)
(Experimental-Settings) Small Hole Size: 7.0mm Small Feature Speed: 40%
Like this model? Create a free account to save your favorites and come back to them later.
Create account