Quick mod of https://www.thingiverse.com/thing:4738646 from the amazing MatziK. I had a bunch of pre-soldered NodeMCU V2 boards handy and wanted to use one to monitor my greenhouse with a BME280. Modded the base to fill in the screw holes, adjusted the height of the mounts for the board to get the micro-usb to line up correctly when upside down and then made the board itself have some pegs to hold it in place as the wires on the pins keep it snuggly in place anyway. Also got rid of the extra scewholes in the sensor area as I didn't need them. Finally modded the tall vented top to give room for the wires to go from the BME280 sensor to the board (see photo).

Printed with supports to base to support the USB / Sensor area of the base. Gave the PLA a spray with clearcoat to hopefully make it more UV resilient.