Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Automatic Coffee Machine por Roberto-Nicolas no Thingiverse

Descrição

Extension to be applied above the "Nespresso U" coffee machines to make a coffee from a distance. It can be activated with touch sensor, IR remote control or 433MHz radio waves (and therefore also via Broadlink-Alexa). The device checks that the capsule, cup, water are present and that the used capsule tank is not full. Otherwise it does not operate but produces an audible and a visual warning. Complete with voice guide. Used an Arduino UNO board.

Estensione da applicare sopra le macchine da caffè "Nespresso U" per fare un caffè a distanza. Attivabile con sensore touch, telecomando IR o onde radio 433MHz (e quindi anche tramite Broadlink-Alexa). Il dispositivo controlla che siano presenti la capsula, la tazzina, l'acqua e che il serbatoio delle capsule usate non sia pieno. In caso contrario non si aziona ma produce un avviso sonoro e uno visivo. Completo di voce guida. Utilizzato una scheda Arduino UNO.

https://youtu.be/Lx4aMKtATD4

https://youtu.be/rZyb6lerwuc

https://youtu.be/_igSHt8mZqg

https://youtu.be/7lehtjC2bak

Thingiverse

Automatic Coffee Machine

10
Curtidas
0
Downloads
9
Coleções
Tags
Alexa Automatic capsula Capsulas CNC Machine Coffee coffe machine machine nespresso robotic robotics
Licença Creative Commons - Attribution - Non-Commercial
Arquivos (16)
Spessore_Caricatore.stl 684 B
Distanziale_Sensore_Capsula.stl 118.3 KB
Scatola_mm_2-8_Fori_Alimentazione.stl 11.4 KB
Spessore_Servo.stl 93.5 KB
Rondella.stl 59.3 KB
Perno.stl 34.1 KB
Servo_Horn.stl 61.6 KB
Spessore_Display.stl 17.9 KB
Supporto_Sensore_Capsula.stl 11.2 KB
Coperchio_Display.stl 42.1 KB
Caricatore_Rinforzato_Foro_Rettangolare.stl 26.2 KB
Supporto_Schedina_Interfaccia_Ridotta.stl 154.5 KB
Supporto_Arduino_Uno_Incastri.stl 153.4 KB
Coperchio_Sensore_Tazzina.stl 2.4 KB
Coperchio_Scatola_mm_2-8_Fori_Alimentazione.stl 22 KB
Supportp_Servo_MG996R_e_Distributore_Forato.stl 414.5 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta