Update: Added a modified Ender 3 X limit bracket cover with a cutout prevent the X belt from binding.

** In Testing Phase** Discord: Hamm3rs#5476

For E3d V6 hot end. V-roller carriage plate to mount on to 20x20 extrusion. Integrates a direct drive extruder, BL touch, 30mm radiator fan and dual 5015 blowers. Can also be used in Bowden setup as well.

Material I use was CF-PC : https://filaments.ca/collections/all/products/carbon-fiber-pc-cpe-1-75mm?variant=32933355814997

Direct Drive extruder:
Sherpa mini from aliexpress SLS nylon printed. https://github.com/Annex-Engineering/Sherpa_Mini-Extruder

Dual 5015 blower ducts: I used the ducts from a voron tool head called Mantis, made by Long. https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Long/Mantis_Dual_5015

Hardware: x15 of 3mm heat set inserts. https://www.amazon.com/gp/product/B08BJD3W4X/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Various lengths of 3mm cap screws ( i will update specific lengths later) https://www.amazon.ca/gp/product/B07CBZRXQ8/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

Used the same v-roller screws and nuts that came stock with the printer. Zip-ties BL touch

Printing: 0.6mm hardened nozzle at 0.3mm layer height and 0.6mm width. 3 perimeters 60% infill. Cubic pattern supports only needed for the 30mm fan duct.