###ParamTray - Customizable Tray ###G. Tielke, August 2021

###A new version is available here: ##Parametric Tray with Simple Latch Lid ##https://www.thingiverse.com/thing:5539453

Inner Tray for ParamBox (or for use by itself)

>Creates 3d-printable tray to fit hinged storage box [see the separate ParamBox that I published]. The size and other settings are parameters that can be set by the user.

This design was initially inspired by: >Small stuff organizer - screws, nuts, fastener 1.4 >by Zvedak July 14, 2021 >https://www.thingiverse.com/thing:4908289

To Customize use "Open in Customizer" from this Thingiverse screen. (It takes a minute to open.) Use the sliders and scroll boxes to change the settings. Click "Create Thing" to create .STL file for your slicer.

If needed, you can use the work-around for the Thingiverse Customizer explained here by "Way of Wood": https://wayofwood.com/how-to-fix-thingiverse-customizer-not-working/

See the Detailed Notes text file for more details. Some example .STL file results are provided.

Up to 10 compartments (9 dividers) can be specified, in each direction. Text labels can be added to the front side, for each compartment.

These trays can be made to fit the ParamBox, for instance by stacking two or more in a box. The top one may need to be made smaller to enable the lid to close. The "front inset" setting will help with this.

Slicer settings: No supports or raft should be required. Infill can be small, such as 10%. Speed can be quite fast, I printed these at 150 mm/s (first layer at 40 mm/s) using eSun PLA+ filament. You may want a slower print speed to improve the quality of printing.