!!Read me carefully!!

Set-up wheels for electric and nitro 1/10 touring/drift cars allows for perfect, precise and repeatable set-up adjustment and tweak correction. Eliminates the errors inherent in using standard rubber/pvc tires or foam tires. Precision to exacting tolerances, each set-up wheel in a set is perfectly matched.

When checking tweak on a rubber-tired touring/drift car, using standard rubber/pvc tires typically gives non-precise and non-repeatable measurements. Rubber/pvc tires are never perfectly rounded, so when checking tweak one tire can lift earlier than another but this does not always indicate a tweaked car. Tire roundness and insert weight is different from one tire to the next.

..Scenario.. -Tweak set-up.. -Camber, caster, toe set-up.. -Suspension drop set-up.. -Link drop set-up.. -Steering angle set-up.. -Ride height set-up (if it has the same size as your drive wheel, otherwise you can just use it for height equalization from multi point).. (You can use it for many other set-up scenario)

..Final diameter with 3mm rubber shoe (66,5mm) ..You need 3mm rubber cord (3x~199mm each) Try it: You can use it for flat cut: https://www.thingiverse.com/thing:4704196

Note1: I glued it with standard instand glue. Note2: You can use obj file like as stl, your slicer can be open it, but if it can't; reinstall your slicer and choose the obj section!

3 different model added (mk1,mk2,mk3) i'm using mk1. All models have the same dimensions.

Important: If you want to make perfect set-up on your car, you have to use perfectly flat surface and leveled precision board.