Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D H-shifter with sequential mode por timetodime no Thingiverse

Descrição

This is a 3D printable remix from: https://www.youtube.com/watch?v=FBzPXGkioP8 Mine in action: https://youtu.be/ctGb2LulKnQ

Build guide PDF in downloads!

Previously I was using the H-shifter from the Thingiverse user Noctiluxx and for me it was too fragile and too light no matter what spring I used, therefore I made this. At the time of writing this I have used the shifter for around 5 hours and have no complaints yet and hope that you guys will enjoy it aswell.

The shifter has 3 different modes for the detent spring. If you want you can make the shifting really light, medium or heavy.

My shiftknobs inner diameter was 14mm but I printed a 3d printed barrel that I threaded m8 and then pressed it into the knob with a vise. then i put in a m8 rod and threaded it into the 15mm square tube which also had a threaded 3d printed insert. (see photo) If your 15mm tube has 1mm walls use the according files: "insert 1mm wall"

*The one I'm using has a h pattern made from 1.5mm sheet aluminium. I myself havent tested the 3d printed version, according to my cad simulations it should work perfectly fine. If there are problems please contact me and I will try to resolve them

Included are the drilling templates for the 15mm square tube aswell as a template for the h pattern if you want it to be some other materia.

PARTS

Thingiverse

H-shifter with sequential mode

timetodime timetodime (abre em nova aba)
42
Curtidas
0
Downloads
50
Coleções
1
Impressões
Tags
Sequential Shifter shifter simracing simracing rig simulator
Licença Creative Commons - Attribution - Share Alike
Arquivos (27)
swivel_Front_Plate.stl 143.4 KB
Swivel_Back_Plate.stl 86.8 KB
spacer_3_4x.stl 56.3 KB
bearing_path.stl 150.3 KB
bearing_carrier.stl 112.6 KB
Swivel_Side_2.stl 489.5 KB
Spacer_2_2x.stl 56.3 KB
14mm_to_8mm_shitknob_adapter.stl 70.4 KB
Swivel_Side_1.stl 365.7 KB
Arm_2x.stl 85 KB
bottom_M8_threaded_insert.stl 29.8 KB
back_brace.stl 86.2 KB
Side_2.stl 59.8 KB
top_m8_threaded_insert.stl 29.8 KB
Side_1.stl 59.8 KB
spacer_1_2x.stl 56.3 KB
seq_nut.stl 652.8 KB
structural_brace.stl 175.3 KB
H-_pattern_plate_4mm.stl 480.2 KB
m5_nut_cover.stl 535.5 KB
switch__mount_2.stl 87.4 KB
switch__mount_1.stl 89.3 KB
thin_spacer_2x.stl 56.3 KB
Assembly_2.stl 26.3 MB
insert_1mm_wall_2.stl 29.8 KB
insert_1mm_wall_1.stl 29.8 KB
Plastic_h_pattern.stl 480.2 KB
Ver no Thingiverse (abre em nova aba)
Comparar agora