Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Tunnelplan Lighthouse.
This lighthouse uses a number of parts from Thing 1564751. https://www.thingiverse.com/thing:1564751 Because I wanted to make a lighthouse with a height of 1350 mm, the STL parts used had to be printed 160% larger. Because everything is printed on a Prusa MK3 and a Prusa Mini, the base is made in 4 parts. The individual tower segments have a height of 180 mm. The transitions from red to white segments are ringed. The handrails are made of 3 mm filament.
To make the tower more spectacular I bought a tower light (14 euros). It has a rechargeable battery and a solar panel with light sensor. A reflector revolves around the lamp. Carefully disassemble and place in the printed parts. Extend wires and solder them together. https://www.banggood.com/en/Solar-Powered-Lighthouse-LED-Rotating-Solar-Light-Outdoor-Garden-Lighting-Lamp-Decor-p-1567223.html?rmmds=myorder&cur_warehouse=CZ The lamp has an on/off switch and is attached to the top part with 2 screws.
Connect the parts by spot welding on the inside with the tip of a soldering iron. The lamp is attached to the "borg" with a screw M3. Segments 3 and 4 fasten together with 3 screws M3 Have fun making this lighthouse.
Latest update 20-7-2021
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta