Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D KP3S Base por Squirrelbrain no Thingiverse

Descrição

Wanted to house the power supply for the KP3S underneath the printer so designed this Base, holds a LRS-350-24 or Standard power supply and a Pi 3 B+. The Base plate from the Kingroon now bolts to the bottom of the new frame, M3 heat inserts ( M3 X D5.0 X L3.8 ) hold the Base plate to the frame.

*BASE PLATE/ Buttonhead: M3x6mm X6 M3x8mm X2

BASE/ Countersunk: M3x40mm X1 M3x35mm X7 Buttonhead: M3x12mm X8 Heat set inserts X16

POWER SUPPLY/ M4x8mm X4 M4x10mm X1 (Fan housing)

*Added PSU mounts with offset holes.

*If you could follow me on Twitch I would appreciate it: https://www.twitch.tv/squirrelbrain79

Thingiverse

KP3S Base

Squirrelbrain Squirrelbrain (abre em nova aba)
440
Curtidas
0
Downloads
505
Coleções
7
Impressões
Tags
base kingroon kingroonkp3s Kingroon KP3 kingroon kp3s Octoprint power supply power supply cover power supply housing raspberry pi case rpi3b rpi3b case upgrade Kingroon KP3
Licença Creative Commons - Attribution - Non-Commercial - Share Alike
Arquivos (18)
Panel_small_Hex.stl 83.7 KB
RRT.stl 101.4 KB
FLB.stl 119.4 KB
RLT.stl 136 KB
FRT.stl 100.7 KB
Panel_small_blank.stl 22.5 KB
FRB.stl 129.1 KB
RRB.stl 119.4 KB
RLB.stl 139.5 KB
Panel_large_blank.stl 20.2 KB
FLT.stl 104.8 KB
Panel_large_Hex.stl 88 KB
PS_mount_front.stl 111.8 KB
PS_mount_rear.stl 109.8 KB
PS_mount_rear_+.stl 109.7 KB
PS_mount_front_+.stl 116.2 KB
board_cooling_duct.stl 3.1 MB
board_cooling_duct_locking_ring.stl 36.8 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora