This is a work in progress build of my redesign of the SFF Case Cube 1.0.

The original design was made by @Gunnthorian.

I hope this design fixes all downsides of the version 1.0.

This case supports:

• 300mm GPU
• SFX PSU
• (M)ITX motherboard
• Standard CPU tower coolers with fans up to 120mm. I used the measurements of the scythe mugen 5.
• 2.5inch SSD and HDDs should definitely fit, 3,5inch could get tricky
• 120mm fan in front (depending on your cpu-cooler setup, you may be able to put a 120mm fan in the back)
• side IO Shield

Things you will need besides the printed parts:

• All panels are planed as acrylic, but 3mm wood would also work. Therefore you would need a laser cutter or a steady hand for cutting wood ;)
• Screws and Threaded inserts: ~30(pieces): M3x6mm L x 5mm OD threaded inserts ~30(pieces): M3x10mm screws
• Front IO ( i used this: https://smile.amazon.de/gp/product/B007XCMQHS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 , but its not available at amazon right now)
• PSU Cable-Extension C13-C14 or similar ( https://smile.amazon.de/gp/product/B002Y4PT92/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 )

Feel free to comment if you have suggestions. The files will most likely also be hosted on cults3d.