One day, the child's mother pointed to a picture on her phone and told me, "You print toys for your child every day, and I want one too." Then I took a look, is a "shake" on a rotating hook, simple structure, can hang a variety of kitchen utensils, but also can be rotated. So I spent an afternoon modeling, the next day printing process found some design problems, right repeatedly modified, and finally finished making. The mother of the child is very satisfied with the use, very praised me! This is the joy of creation, I hope you will also like it! The rotating hook is composed of four parts, the base bracket, angle adjustment column, hook seat and hook, connected with M316 screw, M320 screw and M3 nut each. The angle adjusting post is connected with M316 screw, M320 screw and M3 nut. The angle adjusting post and the angle adjusting post are specially designed with tooth-slot structure, so it is easy to adjust the angle by loosening the connecting bolt, and it is easy to tighten the bolt by hand after the adjustment is finished. The base I use double-sided adhesive bonded to the wall, very strong, of course, you can also be fixed on the screw (please drill your own holes in the base). ABS is easy to warp, please remember to use the brim edge to strengthen the fixed, do not need to support. I am using the machine translation, there are semantic errors please understand!

Translated with www.DeepL.com/Translator (free version)