A lightbox to house some LEDs sourced from a cheap rechargeable light. Curved box is designed to take custom lithophanes created using the following settings:

See Video: https://youtu.be/3i6UzTQTSZU

Image to Lithophane Website: https://3dp.rocks/lithophane/

Settings used for Outer Curve lithophane.

Model Settings: Maximum Size - 150mm Thickness - 2mm Border - 4mm Thinnest Layer - 0.8mm Vectors Per Pixel - 10 Base/Stand Depth - 0 Curve - 0

Image Settings: Positive Image Mirror Image Off Flip Image Off Manual Refresh Repeat X Count: 1 Repeat Y Count: 1 Mirror Repeat Off Flip Repeat Off

Image preparation: Crop your image to 2:3 (ratio) Save image as .jpg less than 1mbs

Slicing settings for PolyTerra™ PLA Cotton White (Start with generic PLA settings): Extrusion Multiplier - 0.9 (90%) Extrusion Width - 0.4 Shells/Perimeters - 3 Infill - 0% Layer Height - 0.15mm Allow single extrusion fill - (Internal 20%) Print with a Brim to help with bed adhesion