Designed in Catia v5 and brought over for initial print. Will revise if changes are needed. Part was designed using measurements from the broken part.

Print is intended to use the stock bolt and nut to be attached to the handles.

Original Part: Black

Rev 2 : Blue and Rounded with Hexagonal cutout for Bolt Scale of Second Print (rev2): 100% - Conversion between Catia and Cura worked Support: Over Build Plate (45deg) Adhesion: Skirt and Bed Weld Bed Temp: 65-70DegC (Helps with lifting for my setup) Nozzle Temp: 210DegC