Not much more to say, it speaks for it's self: Retro floppy disc with doom logo to be used as a keyring or similar, current size is a large key ring so scale down for something smaller.

I used the floowing settings in CURA, please not i have issues with adhestsion to the plate so have fan cooling OFF, slower speeds overall, Brim ON :

Quality Layer Height (mm): 0.1 Shell Thickness: 0.8 Enable retraction: Yes

Fill Bottom/top tickness: 0.6 Fill density (%): 20 Perimieter before infill: Yes

Speed & Temp. Print speed: 50 Print temp: 190 Bed Temp: 90

Support Support type: None Platform adhesion: Brim (10)

Fillament Dia: 1.75 Flor (%): 100

Machine Nozzle size: 0.4

Retraction Speed: 50 Distance: 5

Quality Initial layer thickness: 0.3 Initial layer line width (%): 100 Cuto off obj.: 0 Dual extruusion overlap: 0.15

Speed Travel: 150 Bottom layer speed: 20 Infill spedd: 80 Top/bottom speed: 15 outer sheel speed: 30 Inner shell speed: 60

Cool Min. layer time: 5 Enable fan cooling: No