ITX Computer Case Bamboo Tower

My new designed ITX computer case "Bamboo Tower".

I printed the Case in PETG, no temperature problem. (PLA not tested) The case is completely ready to print.

I am currently working on the 380 ° dust protection. Will be usable as an extension to this case. Presumably even without having to print the existing component again.

Used PC hardware: MB: AsRock H87M-ITX (4790K) VGA: EVGA 1070 SC Gaming (ACX3.0 Designe) PSU: EVGA SuperNOVA 550 GM SFX CPU Fan: Noctua NH-U9S Case Fan: Noctua NF-A9x14 PWM 4-Pin

You need. Inner frame: Aluminum flat bar: 4x 40mmx3mm (for my 1070 4x 280mm) All dimensions for holes see pictures 24x countersunk head screw M3 x 12mm 24x nut or self-locking nut M3

PSU: 2x 6mm PSU screw 1x C14 panel mount socket 1x C14 angle cable, 300mm (angle orient yourself to your power supply) 2x countersunk head screw M3 x 16mm (for C14 panel and cap)

SSD: One SSD: 4x countersunk head screw M3 x 8mm Two SSDs: Print Two SSDs holder 4x countersunk head screw M3 x 8mm 8x countersunk head screw M3 x 6mm

MB: 4x standof 6,5mm (i use 6mm standoffs and 0,5mm washers) 4x screws for the mainboard

Case Fan: 4x 14mm Case screws

VGA: 2x countersunk head screw M3 x 16mm (for card holder)

Bamboo shell: Bamboo round pole 6mm 6x countersunk head screw M4 x 60mm

Standing foots: 16mm Steel button (amazon.com/-/de/dp/B00XVJ9M9C) 4x countersunk head screw M4 x 20mm 4x countersunk head screw M4 x 16mm

Printer: Anycubic i3 Mega Material: "Das Filament" PETG 0.2mm no support

Descrição