Ever wanted to simulate my R/C setup without having to put my R/C airplane in the lobby, so I grabbed 6 mini servos from my scrap box and put the parts together.

To complete this built you will need :

• One Rx of your choice
• One RX battery
• 6x mini servos
• 12x 2x8mm self tapping screws
• Print the base in PLA (layer 0.2mm infill 20%)
• Print the airplane silhouette in PLA (layer 0.2mm infill 20%)
• Print 4x round indicators (ailerons)
• Print one flaps indicators + 1 mirrored
• Some CA glue (medium)

For the round indicators, I elected to print them in two colors (white/red) using the Multigcode software (www.softigest.com). The second color starts at layer #9.

Enjoy !