This is an actively-cooled enclosure for housing an All Sky camera running - Thomas Jacquin's software.

It can be equipped with a high quality camera module, a Raspberry Pi Zero, and a 30mm 5v fan.

To enable remote focusing, consider installing the following remote software.

Getting Started

You will need the following non-included parts:

• (1) - Raspberry Pi Zero WH
• (1) - Micro SD card (Sandisk preferred)
• (1) - USB to Micro-USB cable of appropriate length (do not exceed 25'). This will be used to deliver power to the Raspberry Pi Zero WH.
• (1) - Raspberry Pi HQ Camera (with tripod mount removed)
• (1) - StarDot 1.55mm lens
• (1) - JMX 4 Inch Acrylic Indoor/Outdoor Clear Camera Dome
• (1) - 30mm x 30mm 5-volt Fan
• (1) - Set of assorted M2.5 Cap Head Screws
• (1) - Set of M3, M4, M5 Cap Head Screws

You may need the following additional tools:

• Metric tap set
• Needle nose pliers
• Xacto Knife (for cleaning up small imperfections in prints)
• WD-40 (for lubricating threads of fasteners)