Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Hex Driver Bit Rack por ggossage no Thingiverse

Descrição

These are racks for a driver-bit holding system with multiple Holder and Rack sizes. The Holders house 1/4” hex driver bits which have a groove partway down the shank. This will not work for smaller bits that don’t have a groove. See the video below for an overview of the system. All Holders are on a separate project page: https://www.thingiverse.com/thing:4841690

There are a few different Rack versions that support different quantities of Holders. Some are made to sit on a table, and some are made to mount to a wall. All sizes of Racks fit all sizes of Holders. Note that the Rack design enables individual bits to be extracted from its Holder while still in the Rack.

Thingiverse

Hex Driver Bit Rack

ggossage ggossage (abre em nova aba)
10
Curtidas
0
Downloads
23
Coleções
Licença Creative Commons - Attribution - Non-Commercial - Share Alike
Arquivos (36)
Rack_2.STL 9.3 KB
Rack_3.STL 12.8 KB
Rack_4.STL 16.3 KB
Rack_5.STL 20.3 KB
Rack_6.STL 25.3 KB
Rack_7.STL 29.1 KB
Rack_8.STL 32.9 KB
Rack_9.STL 36.7 KB
Rack_10.STL 40.2 KB
Rack_Minimal_2.STL 9.3 KB
Rack_Minimal_3.STL 11.6 KB
Rack_Minimal_4.STL 15.5 KB
Rack_Minimal_5.STL 17.9 KB
Rack_Minimal_6.STL 25.3 KB
Rack_Minimal_7.STL 27.6 KB
Rack_Minimal_8.STL 30 KB
Rack_Minimal_9.STL 32.3 KB
Rack_Minimal_10.STL 34.7 KB
Rack_Tilted_2.STL 49.7 KB
Rack_Tilted_3.STL 94.6 KB
Rack_Tilted_4.STL 98.9 KB
Rack_Tilted_5.STL 103.2 KB
Rack_Tilted_6.STL 107.5 KB
Rack_Tilted_7.STL 111.8 KB
Rack_Tilted_8.STL 116.1 KB
Rack_Tilted_9.STL 120.4 KB
Rack_Tilted_10.STL 124.7 KB
Rack_Tilted_Minimal_2.STL 64.9 KB
Rack_Tilted_Minimal_3.STL 73.1 KB
Rack_Tilted_Minimal_4.STL 81.7 KB
Rack_Tilted_Minimal_5.STL 87 KB
Rack_Tilted_Minimal_6.STL 94 KB
Rack_Tilted_Minimal_7.STL 99.5 KB
Rack_Tilted_Minimal_8.STL 105 KB
Rack_Tilted_Minimal_9.STL 110.4 KB
Rack_Tilted_Minimal_10.STL 115.9 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora