EDIT: Version 2 (Headset stand_V.2) is available now and the version contains the whole stand with the foot part and a top part that is better printable with less supports. This version is based on the first version with an added ´Making printable´ function in Cura (thanks for the advice to @andreasse). The dimensions are the same than in the old version, so if you want to print it on 100% (depends on how large your headset is) with a 200x200x200 printing bed, you need to print it laying. Enjoy!

This is a self-designed headset/headphone holder/stand with some special curved design structures. The dimensions are around 155x145x220mm and my headset (Steelseries Arctis 9 Pro) fits on it pretty well. The holder at the top has a width of 40mm. The headset holder is divided into two parts and the upper part is plugged onto the foot part. If you have trouble placing the upper part on the foot part, try filing down the edge of the top piece or the pins a bit first.

I added a second foot part with an additional cable channel.

I placed the upper part of the stand diagonally lying on my print bed. I needed a lot of support structures and they weren´t that easy to remove (at least with my selected settings), but therefore the curved structures came out well.

Have fun with it and post your version!