This is a simple but effective Sigma 5.8ghz antenna mount for the Five33 TinyTrainer, which holds it at a 45 degree angle. If you'd like a version which holds it a higher, more vertical angle, drop a note in the comments.

Print in TPU, 0.2mm layer height, no support.

It's such a snug fit that if you need to remove it, you'll have to use a screwdriver or something to push the on the bottom of the main shell where the coax wire goes in.

Direct download from my website: http://www.haku.co.uk/3D/TinyTrainer_Sigma_mount.stl

You can sell prints of this, but don't overcharge, and link back here. Tips are most welcome https://www.paypal.com/paypalme/Haku3D and will encourage me to make more designs for everyone to benefit.

Chibi Kaiju try this for your Glide and let me know how it goes haku@haku.co.uk Print in TPU, 0.2mm layer height, no support. http://www.haku.co.uk/3D/FPVCycle_Glide_Sigma_mount.stl

I have added a Foxeer Lollipop antenna mount design after a request for it. Print in TPU at 0.2mm layer height, no support (it's built-in to the design and will snap off after printing). I do not recommend the Foxeer Lollipop because it breaks internally too easily, which is why I never created an official upload of this design, I now use the Sigma antenna which is so much more durable.

Most FPV people may know me as licensetodrive on YouTube https://www.youtube.com/user/licensetodrive