A simple LED spacer for supporting an LED mounted to a PCB.

This is customizable but I included 30mm tall spacers (4mm wide for a 3mm LED and 6mm wide for a 5mm LED). In your slicer simply lower the spacer below the build plate to achieve your desired height.

Set the height and diameter of the spacer in the customizer app and you should be good to go.

For better stability I recommend setting the diameter to the LED size plus 1mm. For example 3mm LEDs work best with a 4mm wide spacer; 6mm for 5mm LEDs.

The default pitch is 2.54 which accommodates common protoboards.

The default hole size of 1 is enough for LED leads, you shouldn't need to mess with this.

I recommend using a brim.