Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Xbox One Controller Car Conversion Kit por JnBean no Thingiverse

Descrição

Update V0.98: 6 Part steering wheel - maximum sized to fit on almost any std sized printer

Update V0.96: Finally the new self centering 900 degree steering is updated!

######Update V0.82: Changed the HPatternHousing for a better clearance when shifted in fifth and sixth gear.

######Update: Incase you already downloaded the base plate - I had forgot one hole for the front left leg of the shifterhousing... Sorry! Now its updated and uploaded! Left baseplate is added aswell.

Xbox One Car Conversion Kit ====================

https://www.youtube.com/watch?v=RKpn7CI9Sw8&lc=z22jexbguprqzdwrk04t1aokgkty5skpeavkjcngqnhyrk0h00410.1617027544674283

This is a conversion kit for Xbox One Controllers. It enables you to get a steering wheel, brake and throttle pedal and a full 6+R H-Pattern shifter with just the prints and a few screws here and there.

Keep in mind this thing is work in progress - I will updating some of those parts for better printing possibility and better usability.

Some parts like the base, the arms and the xbox-holder-clamps are derived from the Snap-on XBOX HOTAS from akaki - mate, that thing is just amazing, thank you for that design!

!!! To be able to shift with the right thumbstick you need my software that translates the shifts on the Xbox Controller to the gears ingame. !!! You can get the software over on my patreon-site:

https://www.patreon.com/JnBean

###For the current design (V0.8) you need the following extras:

####For the Controller-Kit:

3x M3x12 Small standard-kitchen-rubberband (I use some clamps to clamp the bases down to my table as you can see in the video. In further updates I will try to eliminate the need of those clamps)

####For the pedals:

Thin fishing line (or any line you can get your hands on) to connect the pedals with the throttle and brake levers. 4x M3x12 4x M4 screws or 4 mm wood screws to screw the throttle and brake holder on a wooden plate or smthn (I used cardboard and M4 screws with a nut on the other side.)

Throttle_Brake_Lever needs to be printed twice, every part needs to be printed once.

Thingiverse

Xbox One Controller Car Conversion Kit

JnBean JnBean (abre em nova aba)
2,329
Curtidas
0
Downloads
2,049
Coleções
7
Impressões
Tags
simracing simracing rig Xbox one controller
Licença Creative Commons - Attribution - Non-Commercial - Share Alike
Arquivos (35)
0.8_Right_Throttle_Leverholder.stl 286.4 KB
0.8_Throttle_Brake_Lever.stl 181.9 KB
0.8_Left_Steeringwheel_Axis.stl 195.1 KB
0.8_Left_Brake_Leverholder.stl 288.8 KB
0.8_Left_Steering_Arm_Short.stl 207.8 KB
0.8_Right_Shifterrod.stl 167.1 KB
0.8_Left_Controllermount.stl 377.7 KB
0.8_Left_Steering_Slide.stl 108.5 KB
0.8_Left_Steering_Arm.stl 60.5 KB
0.8_Right_ShifterYAxis.stl 1.6 MB
0.8_Right_Controllermount.stl 469.9 KB
0.8_Right_Shifterknob.stl 1.4 MB
0.8_Left_Steeringwheel_Thumbstick_Collar.stl 394.5 KB
0.8_Right_Shifter_YAxis_arm.stl 452.8 KB
0.8_Right_Shifter_XAxis_arm.stl 799.6 KB
0.8_Right_Shifter_Thumbstick_Collar.stl 1.2 MB
0.8_Right_ShifterXAxis.stl 689.1 KB
0.8_Left_Steeringwheel.stl 2.5 MB
0.8_Right_Baseplate.stl 513.6 KB
0.8_Pedals_Brakepedal.stl 297.7 KB
0.8_Pedals_Throttlepedal.stl 297.1 KB
0.8_Pedals_Mount.stl 320.8 KB
0.8_Left_Baseplate.stl 391.7 KB
0.82_Right_HPatternHousing.stl 2 MB
0.96_Left_Steering_Arm.stl 181.2 KB
0.96_Left_Steering_GearedSlide.stl 291.1 KB
0.96_Left_Baseplate.stl 860.9 KB
0.96_Left_SteeringColumn_Selfcentering.stl 4.3 MB
0.96_Left_Steering_GearFront.stl 8.9 MB
0.98_SteeringWheel_Bottompart.stl 62.3 KB
0.98_SteeringWheel_RightArm.stl 90.1 KB
0.98_SteeringWheel_LeftArm.stl 89.9 KB
0.98_SteeringWheel_Center.stl 329.8 KB
0.98_SteeringWheel_WheelCut.stl 3.4 MB
0.98_SteeringWheel_WheelCut_Back.stl 3.4 MB
Ver no Thingiverse (abre em nova aba)
Comparar agora