Easy print, great looking, and compact corner LED lamp.

See it in action: https://gofile.io/d/9rG8Fp

What you need to print

• 12x `tube` (no support, vertically)
• 1x `base` (with supports)
• 3x `top_cap` (no support, vertically)
• 1x `top_support_32mm` or `top_support_110mm.stl` depending how far you want the lamp away from the wall (no support)

Print tips

Make sure you have enough infill and at least 3 layers for the bottom/top and walls. Overall, the construction is a bit on a wiggly side: that's why we need the top_support. I suggest `top_support_110mm.stl`. You can mount the top support using a small piece of double-sided tape. You can also fix `base` using double-sided tape if you have hardwood floors.

Hardware

• WS2812B LED strip - I'm using a 16.4FT / 5M - 300 LED density -- It's pretty cheap and gives enough of light to decorate your walls (https://www.amazon.ca/gp/product/B07WD6L31K/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1)
• a small ESP8266 dev board -- I'm using `IZOKEE D1 Mini` - it's 100% Compatible with WeMos D1 Mini (https://www.amazon.ca/gp/product/B076F53B6S/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1)
• A 5V/5A (for 100 LEDs) power supply (100 of WS2812B at 100% brightness is approximately 5A; choose your power supply depending on your LED strip) with an input jack

Software

I'm using slightly modified software from NimmLor. You can find my version at https://sr.ht/~yeoldeporkpie/corner-led/ and the original one at https://github.com/NimmLor/esp8266-fastled-iot-webserver

Instructions

Available at https://github.com/NimmLor/esp8266-fastled-iot-webserver/blob/master/Software_Installation.md