Adjustable 3d printer feet. Fit 4040 rails. 10mm height range. 40 x 40 x ~18-28mm

Printed on a stock Voxelab Aquila. Clearance on the threads is .275mm. I needed to work the threads together a little to get smooth operation but they adjust smoothly after working them. Wait until they are fully cooled.

Flat feet so you can attach padding/damper to the bottom.

The rear body was designed to fit with the power source in place on my printer. The short nub is 23mm in length.

I used double sided tape on the top face to stick them to the rails.