Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
A modular and versatile print head design for (but not limited to) HyperCube evolution and E3D V5/V6 Volcano, or regular.
Updates
13/02/2023 - added mount for the G5 Flex Drive extruder 22/03/2020 - added Fusion 360 CAD files for the full assembly 22/03/2020 - added support for Bigtreetech Dual Color or Mix Hotend 14/03/2020 - added endoscope camera mount
Features
Easy tool change:
- the entire print head can be secured safely to the X-axis carriage with just one M3x12 screw
- the E3D extruder can be removed without detaching the entire print head using 2x M3x10 screws
- both connectors (carriage->print head and print head->extruder) provides a rigid connection designed to avoid any oscillations during print
- generic carriage connector design allows creating or adapting new or existing tool-heads for this X-carriage
Fans and extruder:
- supports E3D Volcano and regular-sized extruder
- each of the fans (front, side-left, side-right) can be removed from the print head for service or replacement
- uses the less noisy 40mm front fan
Bed leveling:
- built-in ergonomic support for 12mm inductive or capacitive ABL
- ready for BL-Touch (print head plate has 18mm screw-in holes for mounting the device)
- offset from nozzle to probe is X:0mm Y:-30mm
Printing light:
- built-in space for mounting front LEDs or interior LEDs (you can connect 12V LEDs in parallel with the fans)
Endoscope camera:
- support for endoscope cameras (camera should be at most 7.5mm thick)
Esthetical:
- no screws visible when completely assembled
- magnetic top cover to hide cables
Versatile:
- X-axis carriage presents multiple connection points for future accessories
Dual-color hotend
For the Bigtreetech Dual hotend extruder, print the following parts:
- Head_DualBGT_MainPlate (instead of Head_MainPlate)
- Head_DualBGT_Front (instead of Head_Front_40mm_Fan)
- don't print the Head_Extruder_Lock part (which is necessary only for E3D hotends)
- use the side fan mounts Head_Left_Turbo_Fan and Head_Right_Turbo_Fan (not the ones designed for Volcano hotends)
The rest of the parts stay the same.
Requires
- M3 x 12 mm screws
- M3 x 10 mm screws
- 5mm x 5mm x 5mm brass inserts
- 5mm x 5mm x 5mm cylindrical magnets for top cover
- 2 x 40 mm turbo fan (part cooling)
- 1 x 40 mm fan (cold end cooling)
Printing
Most of the parts have supports built-in, so no supports are required. It is recommended to activate support material only for the X-carriage, as it has a section requiring a long bridge to be printed.
Print with: 0.2 mm layer height, 30-35% infill, 0.4 mm nozzle. PLA will work, but PET will be preferred as it copes better with high temperatures.
Enjoy
