Sunrise Smart Light

Arduino WIFI Clock to animate LEDs with the sunrise. Based off the NTP Client sketch provided by Arduino, and using the Dusk2Dawn library, modified to run on an ESP-12E.

All Project Files on GitHub

Materials

• ESP-12E (and Micro-USB cable)
• LED Square 8x8
• OLED IC2 32x128 Screen
• Push-Button Microswitch
• 3D Printing Filament

Print Settings and Instructions

Top (for translucent effect using just white)

• Wall Count: 1
• Top Layer Count: 12
  • Since the top is printed upside down, the top will be connecting to the base.
• Bottom Layer Count: 4
• Infill: 10%
• Infill Pattern: Cubic
• Brim (In/Out): 8
  • Trim the outer brim, and optionally leave the inner brim for softly lit edge.

Base

Whatever settings you prefer, I used:

• Layer Height: 0.3mm
• Infill: 30%