Spice Rack with Drawers (Stackable)

** Summary **

This is a 2-drawer spice rack that is stackable with adjacent units to form a full tower. I have printed two sets, so I have 4 drawers total. Each pair of drawers holds 12 spice jars.

The entire thing is assembled with M3 6-8 mm length screws (the entire thing can be assembled with a single length of screw). No tapping should be required, but depending on your filament you may want to pre-tap to reduce the chance of cracking.

All pieces are labeled with the required print quantity to make one spice rack. 2x_(etc) means that the file must be printed twice to yield a full spice rack.

** V2 Spice Rack **

The V2 design contains several improvements over the V1. Notably:

The side rail profiles are fixed to tolerance the holes properly,
The datum pins for the side rails can now be printed and clearanced without support or cleanup
Side rails are labeled "Left" and "Right"
Top/Bottom plate has been thinned to reduce plastic usage

A full 2-drawer set now takes about 0.65 kg to print

ZIP contents are as follows:

Folder	Description
cura_3mf	.3mf files from my Cura including layout and print settings for Ender 3 Pro with Hatchbox PLA
creo_asm_v2	Creo Elements assembly .prt files and .asm file
stl	STL files
STEP_AP214	Spice rack part files in STEP format (AP214 formatted) output for CAD interchangeability
solidworks_export	Export in solidworks part format - I don't have solidworks so no guarantees
nx_export	Export in Siemens NX .prt format

** V1 Spice Rack **

The V1 design was my first attempt at this, I am including the files in case they are useful. Please don't print from this ZIP file.

Descrição