Recently my brother's laptop fell in the bath while watching netflix. So I thought of something firmer to use as a bathboard. A standard board lays on the edge of a bath and can easily slide off.

I came up with an idea to make a bathboard with molded feets that hold the board in place and can't move while using or bumping into it. I made this by the following steps:

• To replicate the perfect curvature of the bath, I used my 3D pen to sculpt the edge.
• I took a picture off the result and imported it in fusion 360.
• Then I recreated the curve with a spline and made the feet out of it.

If you don't have a 3D-pen, this molding process can easily be done with some oasis foam. I added the step files so you can edit the design to match with your bath, but it will not be a perfect match. Leave a comment if you'd like that I make a video of the sculpting process.

needed tools:

• screwing machine
• woodsaw
• 3D-pen or oasis foam, clay, plasticine,...

needed mechanical parts:

• 2x wooden planks: width 95mm | thickness 17 mm (thinner is possible, but use shorter screws)
• 8x 4,5x25mm woodscrews
• 4x 4,0x20mm woodscrews
• 4x Ø11mm anti-slip bumper

Future modifications:

• Adding a notch to insert an ipad
• Adding a insert for a drinking glass