Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Rolling Storage Box por 3d-printy no Thingiverse

Descrição

This is a customizable rolling storage bin system.

Pick a size (small, medium, or large) and 8 bins that match your storage needs (you must include a "start" and "end" bin).

Connect the bins by inserting a short piece of filament into each hinge joint.

Update - Feb 9th, 2020

A new extra large bin size has been added. This is long enough to fit pens and markers.

Update - Feb 12th, 2020

A new alternate end bin design. Supports velcro straps or pull tabs to make opening the bin easier. This is highly recommended for the larger sized bins.

Update - March 8th, 2020

-New stackable core design. -New drawer bin design. -New sliding bin design.

##Optional

  • Add 6mmx3mm cylinder magnets to the start and end bins to keep the bin securely closed
  • You can add print-in-place hinges by placing each bin 35mm apart and inserting the included pin stl inside each hinge. The pin STL will plug and seal the hinge hole.

Videos

Introduction https://youtu.be/Cm5bByFYJKk

More Bins https://youtu.be/ak8NoDQWSmo

Even More Bins https://youtu.be/tUDJG0Tqd8U

Giant Rolling Storage Box https://youtu.be/wqrAZMdrNLQ

Thingiverse

Rolling Storage Box

3d-printy 3d-printy (abre em nova aba)
2,825
Curtidas
0
Downloads
3,932
Coleções
14
Impressões
Tags
bin box hardware organization organizer rolling storage Storage Box
Licença Creative Commons - Attribution
Arquivos (60)
Cap.stl 299.6 KB
Small_Bin_No_Divider.stl 111.9 KB
Small_Bin_1_Divider.stl 113.1 KB
Small_Bin_Long_Divider.stl 112.7 KB
Small_Bin_Start.stl 81.6 KB
Small_Bin_End.stl 77.9 KB
Medium_Bin_No_Divider.stl 161.3 KB
Medium_Bin_1_Divider.stl 162.5 KB
Medium_Bin_Long_Divider.stl 162.1 KB
Medium_Bin_Start.stl 109.8 KB
Medium_Bin_End.stl 103.8 KB
Medium_Bin_End_With_Strap.stl 136 KB
Large_Bin_No_Divider.stl 203.8 KB
Large_Bin_1_Divider.stl 205 KB
Large_Bin_2_Dividers.stl 206.1 KB
Large_Bin_Long_Divider.stl 204.6 KB
Large_Bin_Start.stl 136.4 KB
Large_Bin_End.stl 137.6 KB
Extra_Large_Bin_End.stl 167.1 KB
Extra_Large_Bin_Start.stl 167.9 KB
Extra_Large_Bin_No_Divider.stl 257.1 KB
Extra_Large_Bin_1_Divider.stl 258.3 KB
Extra_Large_Bin_2_Dividers.stl 259.5 KB
Extra_Large_Bin_Long_Divider.stl 257.9 KB
Large_Bin_End_with_Strap.stl 160.4 KB
Extra_Large_Bin_End_With_Strap.stl 199.3 KB
OPTIONAL_Small_Print-In-Place_Pin.stl 83.9 KB
OPTIONAL_Medium_Print-In-Place_Pin.stl 113.2 KB
OPTIONAL_Large_Print-In-Place_Pin.stl 151.1 KB
OPTIONAL_Extra_Large_Print-In-Place_Pin.stl 201.4 KB
Small_Core.stl 345.6 KB
Medium_Core.stl 374.4 KB
Large_Core.stl 393.5 KB
Extra_Large_Core.stl 397.7 KB
Label_Insert.stl 23.7 KB
DISPLAY_ONLY_Assembled_Box.stl 669.3 KB
Small_Drawer_Bin.stl 109.2 KB
Small_Sliding_Bin_Insert.stl 10 KB
Small_Sliding_Bin.stl 106.2 KB
Small_Drawer_Insert.stl 2.2 KB
Stackable_Cap.stl 314.8 KB
Stackable_Cap_Special.stl 510.9 KB
Medium_Sliding_Bin.stl 156.8 KB
Extra_Large_Sliding_Bin_Insert.stl 7.3 KB
Core_Stacking_Large.stl 405.4 KB
Stackable_Cap_Special_Lid.stl 694.5 KB
Extra_Large_Sliding_Bin.stl 253.8 KB
Stackable_Core_Lock_Ring.stl 4.8 KB
Large_Sliding_Bin.stl 200.1 KB
Core_Stacking_Extra_Large.stl 408.7 KB
Medium_Drawer_Bin.stl 159.2 KB
Extra_Large_Drawer_Bin.stl 255.6 KB
Medium_Drawer_Insert.stl 2.2 KB
Large_Drawer_Insert.stl 2.2 KB
Extra_Large_Drawer_Insert.stl 2.2 KB
Large_Sliding_Bin_Insert.stl 7.7 KB
Medium_Sliding_Bin_Insert.stl 8.5 KB
Large_Drawer_Bin.stl 202 KB
Core_Stacking_Medium.stl 376.8 KB
Core_Stacking_Small.stl 358.7 KB
Ver no Thingiverse (abre em nova aba)
Comparar agora