Remix of dmaMods' Anycubic I3 Mega cable chains for Anycubic Mega X =======================================================

Update:

• 22-01-20: Z-axis-RightBottom_orig.stl seems to cause problems with non-Cura slicers, so I added a repaired version of this file

Status:

• Z axis (left and right)
• X axis

Please Note:

Print the chain link parts without support. You should clean and deburr every printed chain link part to improve movability. You can reduce friction (and noise) by brushing the junctions with a pencil. I changed the design of the X axis cable chain, so original cable length is sufficient.

Suggested building sequence:

1. Z axis (left side)
2. Z axis (right side)
3. X axis

Z axis (left side):

Printed Parts:

• Z-axis-LeftBottom_orig - 1 pc
• Z-axis-LeftTop_MegaX - 1 pc
• Chain-Link-C - 26 pcs

Additional material:

• M3x8 - 4 pcs (spare screws for bottom and top part)
• Cable tie - 2 pcs

Z axis (right side):

Printed Parts:

• Z-axis-RightBottom_orig - 1 pc
• XZ-axis-RightTop_MegaX - 1 pc
• Chain-Link-A - 31 pcs

Additional material:

• M3x8 - 2 pcs (spare screws for bottom part)
• Cable tie - 2 pcs

X axis:

Printed Parts:

• X-axis-HotEnd_MegaX - 1 pc
• Chain-Link-A - 25 pcs

Additional material:

• Nut M3 - 3 pcs
• M3x8 - 3 pcs
• Cable tie - 1 pc