Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D SNAP DICE por vikingfabian no Thingiverse

Descrição

Snap-dice: Print the faces and center separately, and then snap them together. No glue needed. 17mm wide.

Each die has 1 mid and 6 faces.

All models already has pre-made supports and rafts. Layer height 0.2mm 40% infill gives about the same weight as a retail die. Go up to 80% for some extra weight. The symbols will get the best contrast if the center is of a darker color than the faces.

Content Blank (use boolean>difference in a 3d modelling software to make your own dice) Numbers: 0 to -3, 1 to 12, 16, 20, 25, 32, 50, 64 D3: three sided dice

Thingiverse

SNAP DICE

vikingfabian vikingfabian (abre em nova aba)
252
Curtidas
0
Downloads
343
Coleções
Tags
dice modular
Licença Creative Commons - Attribution
Arquivos (34)
snap_dice_face_blank.stl 32.5 KB
snap_dice_mid.stl 105.9 KB
snap_dice_face_dot1.stl 34.1 KB
snap_dice_face_D3_3.stl 41.3 KB
snap_dice_face_dot3.stl 36.3 KB
snap_dice_face_minus1.stl 36.4 KB
snap_dice_face_dot6.stl 40.7 KB
snap_dice_face_dot2.stl 34.5 KB
snap_dice_face_num6.stl 44.7 KB
snap_dice_face_num0.stl 43.8 KB
snap_dice_face_num1.stl 35.2 KB
snap_dice_face_num2.stl 40.7 KB
snap_dice_face_minus2.stl 42.1 KB
snap_dice_face_num10.stl 46.6 KB
snap_dice_face_num16.stl 45 KB
snap_dice_face_D3_1.stl 35.4 KB
snap_dice_face_D3_2.stl 38.4 KB
snap_dice_face_num11.stl 37.6 KB
snap_dice_face_dot4.stl 37.6 KB
snap_dice_face_num20.stl 51.4 KB
snap_dice_face_minus3.stl 44.4 KB
snap_dice_face_num5.stl 41.5 KB
snap_dice_face_num64.stl 48.7 KB
snap_dice_face_num7.stl 37.4 KB
snap_dice_face_num3.stl 43.6 KB
snap_dice_face_num4.stl 38.9 KB
snap_dice_face_num12.stl 43.2 KB
snap_dice_face_num9.stl 44.8 KB
snap_dice_face_num25.stl 48 KB
snap_dice_face_num50.stl 52.7 KB
snap_dice_face_dot5.stl 38 KB
snap_dice_face_num32.stl 50.1 KB
snap_dice_face_num8.stl 46.7 KB
snap_dice_mid_no_support.stl 101.4 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora