Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Easy print miniITX Case, CPU cooler support high up to 41mm at CPU and 2x2.5" HDD/SSD.
No need sanding!
Case only for small picoATX adapter with external PSU!
Case assemble size without pad 190x190x75mm, you can be easy print at standart 200x200mm bed printer.
Power button model for 6x6x6 mm tact switches.
You can be stack this case with soft pad(stack_pad) or hard panel(case_stack_panel_no_border & case_stack panel).
For assemble need standart PC screw: UNC 6-32 x 10 for case x4 for MB. M3 screw for 2.5HDD/SSD.
I am print case: MB_panel - ABS PAD - TPU Others - PLA
Support need only for: "Base_Case" "button"
For assemble need:"Base_Case" + "UP_case" + "DOWN_case" + "MB_panel" + "button" + "button_mount" + "PAD".
Assemble:
- install "button" with "button_mount" to "Base_Case"
- install back IO panel and "UP_case" to "Base_Case"
- install SSD/HDD and Motheboard to "MB_panel"
- install "MB_panel" to "Base_Case"
- install "DOWN_case" to "Base_Case"
- install 4x"PAD" to "Base_Case" or "DOWN_case"
UPD1: Add V2 symmetric up/down mount. For assemble need: "Base_V2" + "UP_case_V2"(or "UP_case_V2_2.5_mount") + "DOWN_case" + "MB_panel" + "button" + "button_mount" + "PAD". And support only soft stack_pad.
UPD2: Add V2 SLIM 190x190x60mm for use M.2 SSD or one 2.5" HDD with "UP_case_V2_2.5_mount". For assemble need:"SLIM_BASE" + "UP_case_V2"(or "UP_case_V2_2.5_mount") + "button" + "button_mount" + "PAD". And support only soft stack_pad.
UPD: Fix screw hole size.
