Univeral DnD die! Works as: d1, d2, d3, d4, d5, d6, d7, d8, d9, d10, d11, d12, d20, d24

For d1-d12, pick the die you want to roll (say, a d8) and roll the die. Then look at that position on a clock (in this case, the 8:00 position) to see what number you rolled. For a couple of numbers, you might roll a dot. This means roll again.

For a d20 or d24, use the big number in the center of each face. If you rolling a d20 and get 21+, re-roll.

Printed with PLA at 20% infill, no supports.

I often scale it down to 60% size before printing.

Use the connector cube to attach the two halves. Make sure to attach them so that the big center numbers of opposite sides add up to 25 (for the die to be balanced)