This is a Power station for 4 Raspberries. My wall-mount plug for raspberry power is fully occupied and no free plug is available. So, I created a Power station for 4 Raspberries using only one plug for the transformer.

The basis is just a sleeve over the transformer as the transformer is mounted on a DIN-Rail it keeps the basis in place. Maybe I add something to fix/mount the station at a later stage.

-Update: OK, I created a copy of the basis with inserts for M3 nuts to fix/mount the basis at the transformer from to or button side (or both ;))

-Update: I changed the lid to be able to put a label above the Raspi text. File change - Deckel-V2.stl

Parts I used (I bought all from a local electronic dealer)

Meanwell MDR-60-5 10 Ampere 5Volt 4 Relais Module (for Arduino/Raspberry) 4 Push Bottons Switch with Led (blue) (push to switch on, another push to switch off) 4 USB Cable with open end cable M3x16 mm allen screw M3 nuts M6x16mm flat head screw Standard 230V Power cable 2 Wago 222-415 Cables: K05V-K 0,5mm2, Jumper wire cable female

Printed parts: 2 Wago 5-wire: 222-415 from my remix https://www.thingiverse.com/thing:4675584

The M6 threads in the distance rods need to be "cleaned" by a screw tap.