Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Pendulum clock printed in 3D por 3Dadicto no Thingiverse

Descrição

Pendulum clock printed in 3D Material: PLA It is quite accurate, it has an error of a few seconds every 12 hours of operation. The diameter of the sphere is 250mm. As I did not have a wooden rod of more than one meter, I had to make a joint between rods. In the following video the operation and assembly of the clock is explained: https://youtu.be/6EvNqkYFnQo

BOM: Bearing Ø5x10x4 - 5 units Bearing Ø8x14x4 - 1 unit Calibrated round Ø5x46 - 2 units Calibrated round Ø5x50 - 1 unit Calibrated round Ø4x40 - 1 unit Calibrated round Ø4x24 - 2 units set screw M3x6 - 15 units Allen screw M3x16 - 4 units Allen screw M2.5x8 - 4 units Countersunk head screw M3x10 - 10 units Countersunk head screw M2.5x10 - 4 units Nut M2.5 - 4 units Wooden rod Ø5x1100 - 1unit Wire Ø1.5 or Ø2mm, Length 2 meters

Thingiverse

Pendulum clock printed in 3D

3Dadicto 3Dadicto (abre em nova aba)
1,371
Curtidas
0
Downloads
1,702
Coleções
Licença Creative Commons - Attribution - Non-Commercial - Share Alike
Arquivos (42)
Part_16c.stl 88.4 KB
Part_03.stl 428.1 KB
Part_28.stl 854.2 KB
Part_23.stl 945.9 KB
Part_17.stl 803.6 KB
Part_30x3.stl 126.6 KB
Part_11_01.stl 1.3 MB
Part_22.stl 1 MB
Part_32x3.stl 126.6 KB
Part_26.stl 663.8 KB
Part_11.stl 392.7 KB
Part_25.stl 898.4 KB
Part_09.stl 4.3 MB
Part_21.stl 1.2 MB
Part_31x2.stl 126.6 KB
Part_10.stl 380.2 KB
Part_02x3.stl 331.7 KB
Part_42.stl 174.6 KB
Part_43.stl 72.1 KB
Part_16b.stl 1 MB
Part_04.stl 1 MB
Part_16a.stl 974.5 KB
Part_06.stl 1.5 MB
Part_34.stl 80.8 KB
Part_38.stl 83 KB
Part_35.stl 83 KB
Part_36.stl 83 KB
Part_16d.stl 496.3 KB
Part_16e.stl 277.1 KB
Part_37.stl 91.7 KB
Part_05.stl 1.2 MB
Part_40.stl 773.5 KB
Part_24.stl 127.7 KB
Part_07.stl 668.7 KB
Part_16f.stl 242.2 KB
Part_12.stl 264.5 KB
Part_13.stl 279.8 KB
Part_47.stl 1.6 MB
Ensamblaje_part08_part18.stl 2.1 MB
Part_01.stl 1.8 MB
Part_39b.stl 737 KB
Part_39a.stl 5.2 MB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora