** October 20 2021 ** Added updated Bobbin wheels of varying sizes based off https://www.thingiverse.com/thing:2875543

** Original ** Remixed to reduce the printing time and plastic used by almost 50%.

Original would take approximately 16hrs and use 138g (0.3lb) of filament New would take approximately 8 1/2hrs and use 76g (0.7lb) of filament

There are 2 version of the horizontal rod holder as I did not have enough 6mm rod. Large size takes 6mm rod, small size take 3/16” (roughly 4.8mm) rod

Also 2 version of the Bobbin Wheel, large diameter takes 6mm rod, the other takes 3/16” (roughly 4.8mm) rod

1 x Central rod 8mm x230mm (longest I had) 2 x horizontal rods 3/16 x 200mm 4 x vertical rods 6mm x 40mm

Print 4 x Petal 2 x Horizontal Brace Depending on your preference 4 x Cone Holder and 8 x Bobbin wheel or 12 x Bobbin wheel

The Cone holders are designed to fit overlock thread 'cones' which are much cheaper than buying regular bobbins. These are a remix of https://www.thingiverse.com/thing:3600438

All my Things are provided for free. Please feel free to support me so I can create and share more. Any amount of support is most appreciated. PayPal me