Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Tree house brick por SAIGA3D no Thingiverse

Descrição

3D printed Lego compatible Tree house consist of 32 main parts and a lot of leafs. Need to have Lego bricks for decoration. Also need Lego technic pins (2780 model) to connect parts together. Time to print one part mostly no more than 1.5 hour. To understand how connections work pls watch video first: https://www.youtube.com/watch?v=YSXgVwxIEec&t=139s&ab_channel=SAIGA3D PLA is ok to print. But it's little bit tough for this purpose. PLA+ instead is very good to print bricks. It's tough and soft at the same time. Stiffness close to PTEG I guess. You can print it on print bed less than 10x10cm. The leaf is modified version of leaf found here in thingiverse. Lost the link and couldn't find it. Plz supply it if you know.

Thingiverse

Tree house brick

SAIGA3D SAIGA3D (abre em nova aba)
16
Curtidas
0
Downloads
34
Coleções
Tags
brick lego compatible tree house
Licença Creative Commons - Attribution
Arquivos (33)
Tree_1.2.stl 104.2 KB
Tree_4.stl 210.9 KB
Tree_2.2.stl 126.1 KB
Tree_2.1.stl 126.4 KB
Roof_1.3.stl 159.3 KB
Roof_2.2.stl 132.4 KB
Roof_1.1.stl 88 KB
Tree_10.stl 234.8 KB
Tree_8.stl 267.1 KB
Tree_9.stl 259.4 KB
Roof_1.4.stl 88 KB
Roof_2.3.stl 132.8 KB
Tree_12.stl 214.8 KB
Tree_7.2.stl 97.3 KB
Tree_13.2.stl 131.7 KB
Wall_1.4.stl 254.9 KB
Roof_1.2.stl 159.3 KB
Wall_1.3.stl 234 KB
Roof_2.1.stl 138.9 KB
Roof_2.4.stl 139 KB
Tree_1.4.stl 97.5 KB
Tree_1.1.stl 148 KB
Tree_1.3.stl 130.1 KB
Tree_6.stl 173.2 KB
Tree_3.stl 182.8 KB
Tree_5.stl 231.2 KB
Wall_1.2.stl 216.9 KB
Tree_11.stl 328.2 KB
Leaf.stl 4.1 MB
Tree_14.stl 145.5 KB
Tree_13.1.stl 146.7 KB
Wall_1.1.stl 214.7 KB
Tree_7.1.stl 135.1 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora