This is a remix of the original MaxMix using M3 screws instead of M2. The Bottom is screwed to the Top part using 4 M3x20mm countersunk screws, for everything else I used M3x10mm slotted panhead screws. To hold the OLED screen, I printed a simple block which has a strip of soft foam glued to the slanted top face. I made my own powerbar by just soldering all my positive and negative wires together and shrink wrapping them, so I removed the stems in order to create more space. I used this additional space and all free spots inside the maxmix to attach adhesive-backed wheel weights, so the maxmix is heavier and doesn't slide around as much.