I needed a simple way to transport dice for myself when going to play MTG so I came up with this design.

They are designed to stack on top of one another, mesh together to form a honey comb like pattern and have a locking nut on top to secure the moving dice selector for travel.

There are two different styles a 4 part case and 3 part case, I find for the best finish to be the 4 part case. I have included the thread built into the bottom section for the 3 part version.

The Nut needs to be printed at 102-105% in all axis's to nicely screw onto the thread. If you don't increase the Nut sizing you will strip the thread.

Depending on your printer you will have to adjust it, I find 104% to be just right fit requiring a spanner or the bottom section of the dice case to tighten it on and off of the thread at least twice for a smooth motion.

I have included a Test bottom hole file to test if your nut will nicely fit into the hole at 104%, I can adjust and release multiple sized Holes depending on what is required.