Slim version of my other casing for a Raspberry Pi Zero (W) with the new High Quality Camera V1.0.

This case is designed to securely house a Pi Zero with a CPU cooler. Access to the GPIO ports ist mostly possible.

The original 1/4" UNC mount of the camera module is retained and all internal parts are mounted without screws.

The case can be screwed shut with two 3mm sheet metal screws. (Screw head diameter max. 6mm)

There are several .stl files for the bottom shell:

• with access only to the OTG port
• with access to both USB ports
• with access to all ports

There are also some versions with a larger lens hole for slightly bigger C-mount lenses. Those are conveniently name `*_big_hole.stl`.

The original purpose was to use this as a UVC webcam appliance via USB OTG. To set this up I recommend the following tutorial by David Hunt: http://www.davidhunt.ie/raspberry-pi-zero-with-pi-camera-as-usb-webcam/

The camera modules backfocus adjustment ring is usable, but only if the top shell is removed. The C to CS mount adapter can be unscrewed with the case closed.

** There are separate shells for Raspberry Pi Zero W and Zero v1.3 due to different position of the CPU. **

The cutout for the CPU heatsink is designed for 15x15mm heatsinks