Sturdy casing for a Raspberry Pi Zero (W) with the new High Quality Camera V1.0

*There is an updated version of this here: https://www.thingiverse.com/thing:4560655*

This case is designed to securely house a Pi Zero with a CPU cooler. Access to the GPIO ports ist mostly possible. It has enough space for some additional modules or controllers added via GPIO. The original 1/4" UNC mount of the camera module is retained and all internal parts are mounted without screws.

The case can be screwed shut with four 3mm sheet metal screws. (Screw head diameter max. 6mm)

There are several .stl files for the bottom shell:

• with access only to the OTG port
• with access to both USB ports
• with access to all ports

The original purpose was to use this as a UVC webcam appliance via USB OTG. To set this up I recommend the following tutorial by David Hunt: http://www.davidhunt.ie/raspberry-pi-zero-with-pi-camera-as-usb-webcam/

The camera modules backfocus adjustment ring is usable, but only if the top shell is removed. The C to CS mount adapter can be unscrewed with the case closed.

both Raspberry Pi Zero and Zero W are supported.