I needed a sff case very quickly and I couldn't wait for something from China. It's not pretty but it does the job.

Size:

21x16x27cm or 21x19x27cm

Parts:

• CPU: Ryzen 3800x
• Cooler: Noctua U12s
• MoBo: ASRock Fatal1ty B450 itx
• PSU: Seasonic S12ii-520
• GPU: Manli RTX 2060S

I managed to squeeze my old (non modular) ATX PSU but I had to cut off some old MOLEX connectors. Also I had to put the fan on the U12S is in a pull configuration otherwise the PSU would block the airflow.

3D parts

The case is 6mm thick and has been printed in PLA, then glued together with some epoxy. I have included some holed all around the edges for some optional1.0-1.5X10mm steel wires to make the case stronger.

The parts "Body33.stl" are optional and increase the high of the case by 3cm (you need 4 of them). Without them the case support up to 130mm CPU coolers. With them you can go up to 160mm.

The case also needs 24 3x10mm wood screws (without "Body33.stl") or 12 3x10mm + 12 3x45mm wood screws (with"Body33.stl")