I'll add photos soon.

This is an adapter for attaching tools to the Statsana Cooler for Ender 3/3Pro. I found that I like to tram/level my bed using a feeler gauge at X30, Y30, Z0.
I then use a dial indicator to adjust the rest of the bed. It's quick, easy and accurate, but to do so I hade to be able to mount a dial indicator to the hot-end. I made an adapter to do just that, but I found that I wanted to install other appendages to the hot-end and this is the result. I did not include the dial indicator adapter, because I haven't drawn it up yet. I'm still using the dedicated version of the dial indicator mount at the moment.

I have included the .f3d files for Fusion 360 because you will likely want to modify this to your own purposes.

Manifest: StatsanaCooler_ToolMount.f3d This is the base of the system. All the mounts attach to this. Adapter, Front.f3d This will enable you to mount a tool to the front, parallel to the Z-axis. Adapter, Bottom,f3d This will enable you to mount a tool to the bottom, parallel to the Y-axis. I have not made an X-axis mount yet, I haven't needed one. Blank Tool Adapter.f3d A good starting point for your own tool mounts(adapters), not intended to be useful on it's own. Camera Adapter.f3d A camera adapter I am using with Octoprint(OctoPi). Below you can find a link to a camera similar to the one I am using. .stl file exports of each of the above.

Below is a camera similar to the one I am using. This goes with the camera mount above.
I would actually suggest a better camera, but I have included the mount and this link as an example. The important parts, in this case, are the semi-flexible wiring to the 5mm camera head and USB support. https://www.amazon.com/Android-Endoscope-Waterproof-Borescope-Inspection/dp/B07M5DP5BH/ref=sr_1_4?dchild=1&keywords=Endoscope+USB+5mm&qid=1593225944&s=industrial&sr=1-4

Of course, I am open to suggestions on how to improve this design, my presentation of it, or my use of Fusion 3d. Happy printing, I hope you get some use of this.