IMPORTANT, THIS DESIGN IS NOT ALLOWED TO SELL!

This is an XS version of the tripod I re-designed inspired by Kernel770's tripod. It was primarily designed for those with really small 3.5in³ printers and has shorter legs. In all other aspects it is identical to my larger tripod.

It can handle a heavy DSLR with heavy lens and is so small it can stay on the camera. :)

The camPad is printed in flexible TPU and the rest in ecoPLA.

The 1/4-screw is held in place by a small piece of filament glued in place by CA-glue.

Support is recommended when printing camMount.

Using toothed washers with external-tooth is recommended for heavy setups but is otherwise not needed.

As always, if you find it useful a tiny donation goes a long way to show appreciation. :)

Hardware needed: 1 pcs M5x50 hex-head screw 1 pcs M5 nut 2 pcs M5x10 countersunk screws 2 pcs M5 Nyloc nuts 1 pcs 1/4 10mm screw (http://www.amzn.de/dp/B00OOLKD3K) 2 pcs M5 toothed washers (external-tooth)

My full size compact tripod: https://www.thingiverse.com/thing:4476703