This is a laser cut hood with a few printed parts for a Makerbot replicator 2. I designed it for my future heated built platform, improve overall print quality, especially during winter and hopefully reduce the amount of filament jams.

The top panel can be opened to provide access to extruder when changing filaments.

Use the included .dxf for the laser cutter to cut the panels. The enclosure is designed for 4.5mm thick panels. Anything thicker won't fit the 3d printed parts. Add engravings if you want to.
1x front panel
2x side panel
1x top panel
1x rear panel
Printed parts:
4x corner stand bottom
2x corner stand top rear
1x corner stand top front left
1x corner stand top front right
layer height 0.25mm or less
infill 20%
shells 2

Assemble test fit the assembly on your Makerbot. I used special acrylic glue to weld the side and front panels of the enclosure together. Use a strap or something similar to hold everything firmly together when welding the panels.