Moving project over to printables

PopSocket Modular mount.

So i was looking for some Popsocket mounts but dint find any i liked so i designed one my self. This is design for my phone and car so if it don't fit just tell me and i will make it more universal.

Phone stand you will need:

1x PopSocket Stand Base.
1x PopSocket Stand Pole 30/40 deg.
1x PopSocket Mount.
1x M3x20mm slotted screw.
1x M3 nut.
1x 4,2x32mm slotted wood screw.

If you need a longer/shorter PopSocket Stand pole just download the STEP-file and edit the length your self.

Car mount you will need:

1x PopSocket car mount.
1x PopSocket mount or PopSocket Mount + Support if you are going to use PopSocket Mount arm Support.
1x M3x20mm slotted screw.
1x M3 nut.

Optinal:

1x PopSocket Mount Arm Support.
1x PopSocket Swivel ball Mount Thread.
1x Popsocket Swivel ball Mount nut.
1x PopSocket Swivel Ball Mount Ball.
2x 1,5x15mm steel wire
1x M3x20mm slotted screw.
1x M3 nut.

If you need a longer/shorter PopSocket Mount Arm Support just download the STEP-file and edit the length your self.
You may need to glue some parts together so they don't turn.

Print settings and orientations:

I have used PLA and works fine for me, where i live we dont get it to hot in the summer. but i recommend to use Petg or something better so that the parts don't deforme.

PopSocket Mount is printed flat with Support everywhere and with Brim, print solid, use the lowest Resolution for best fitment.
PopSocket Mount + Support is printed flat with Support everywhere and with Brim, print solid, use the lowest Resolution for best fitment.
PopSocket Mount Arm Support Printed solid.
PopSocket Stand Base printed flat with 25<% infill with any Resolution.
PopSocket Stand Pole printed standing 20<% infill with any Resolution.
PopSocket Swivel Ball mount ball printed standing 25<% infill lowest Resolution.
PopSocket Swivel Ball Mount Nut printed standing with the flatest surface down 25<% infill lowest Resolution.
PopSocket Swivel Ball Mount Thread printed standing with the flatest surface down 25<% infill lowest Resolution.
PopSocket Car Mount printed sideways 25<% infill any Resolution but lower is better.
Use at least 4 top/bottom layers and 5 walls.

Update 05.07.2020

Added a new PopSocket Mount with support for a Arm support.
Added PopSocket Arm Support.
Added Step-file for PopSocket Arm Support.
tweak PopSocket Car Mount to fit 1,5mm steel wire so that the PopSocket Swivel Ball mount Thread won't turn.
tweak PopSocket Swivel Ball mount Thread to fit 1,5mm steel wire.

Update 15.06.2020

Update file names and stl.
Fix wall thickness on PopSocket Swivel Ball Mount Nut.
Small twiks onPopsocket Swivel Ball Mount Thred.
fix PopSocket Pole angeles.
Added Step-file for PopSocket Stand pole 30/40 deg so you can edit the length to your desire.

Planning to at:

Dash mount.
~~Support mount so the phone don't turn around when use inn car.~~
Some short of articulating arm.
Tripod mound.
Bike cycle mount.

If u have some other ides for some mounts just tell me and i will try to make it.

Descrição