PwnCNC believes in our Makers community and is working to bring together non-printed parts and other items to help you make this or any of our things: https://pwncnc.com/make

If you'd rather purchase this thing vs making it yourself, you'll find it listed here: https://pwncnc.com/purchase/ols/products/push-clamp

Push Clamp is the newest 3d printed clamp to join our clamping collection.

It is perfect for applying sideways pressure on your stock and against either our Fences for XCarve (https://www.thingiverse.com/thing:4264416) or PwnCNC Spoil Board (https://www.thingiverse.com/thing:3852143).

It has a long almost 2-inch channel making it sure to hit any of the mounting holes available in the PwnCNC Spoil Board with its 2x2 interlaced pattern (https://pwncnc.org/design/9FvQRG5fzKVy5FYvQiNJ).

Use a long 20mm socket head screw is mounted at a 45deg angle to provide maximum energy transfer between the mounting hole and your stock.

Unprinted parts needed:

1. M5 Heat insert: https://www.mcmaster.com/94180A361
2. M5x20mm Socket Head Screw: https://www.mcmaster.com/91290A242
3. 1/4-20" 3/4" long screw: https://www.mcmaster.com/92949A540
4. 1/4-20 Washer: https://www.mcmaster.com/92141A029

A hardware kit is available from us which includes all the pieces needed here: https://pwncnc.com/purchase/ols/products/push-clamp-hardware