This pokeball is a subscriber recommendation, from our YouTube channel.

The pokeball is made up out of four parts: Top shell, bottom shell, belt and a front knob.

The pokeball is printable without support, but it is a good idea to use a small raft.

We used a bit of costom support on the shells "holes".

Assembling: Press the shells onto the belt, and glue the knop onto it. (You can glue the shells on as well)

Slicer settings: Support - none (we used some costom, but it isn't needed) Bed adhesion - raft (only 3 mm extra margin is needed) Speed - 50 mm/s Walls - 9 (makes the parts solid and concentric) Layer height - 0.2 mm Nozzle - 0.4 mm