Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D MiSTer Case V2 por viperman3 no Thingiverse

Descrição

MiSTer Case V2

Inspired by NegSol case design: https://www.thingiverse.com/thing:2740925

Integrated DE-10, I/O Board and USB Board into single case. All sides of the case are printed flat to create clean surfaces.

I'm using M3x16 cap head screws on the top. These are the board layers and hardware in order from top to bottom: M3x16 cap screw IO Board M3x14mm male/female brass spacer DE-10 Nano Board M3x14mm male/female brass spacer USB board M3 nut or M3x8 female/female brass spacer to which I add the silicone covers the DE-10 came with.

UPDATE:

  • scottie4442 had requested adding the Audio Port to the USB Side Wall. File with update added
  • Added Side plates for USB v2.1, Side with larger SoG switch opening and Longer Buttons with more clearance as requested by CTRFK8
  • Light Pipes ID has been increased to Dia 5.6mm. Ensure your printer is tuned and not overextruding resulting in ID falling short. Optionally a 5.5mm drill can also be used to clean any extrusion start seams in the ID to better fit over the LED

UPDATE 1/19/2022: Added Digital I/O Ports

Thingiverse

MiSTer Case V2

viperman3 viperman3 (abre em nova aba)
88
Curtidas
0
Downloads
139
Coleções
9
Impressões
Tags
mister MiSTer FPGA
Licença Creative Commons - Attribution
Arquivos (19)
MiSTer_Case_V2_-_Ethernet_Side_Plate_B_-_USB_v2.1.stl 303.4 KB
MiSTer_Case_V2_-_Ethernet_Side_Plate_A_-_USB_v2.1.stl 263.1 KB
MiSTer_Case_V2_-_Power_Side_Plate_Digital_IO_v1.2.stl 427.9 KB
MiSTer_Case_V2_-_Lower.stl 22.9 KB
MiSTer_Case_V2_-_Power_Side_Plate_Analog_IO_v5.5.stl 439.9 KB
MiSTer_Case_V2_-_Power_Side_Plate_-_USB_v2.1.stl 480.3 KB
MiSTer_Case_V2_-_Ethernet_Side_Plate.stl 263.1 KB
MiSTer_Case_V2_-_Power_Side_Plate_Analog_IO_v6.1.stl 439.9 KB
MiSTer_Case_V2_-_Serial_Side_Wall.stl 682.9 KB
MiSTer_Case_V2_-_Upper_-_Dia5.6mm_Light_Pipes_Digital_IO_v1.2.stl 2 MB
MiSTer_Case_V2_-_Upper_-_Dia5.6mm_Light_Pipes_Analog_IO.stl 2 MB
MiSTer_Case_V2_-_USB_Side_Wall_Analog_IO.stl 1 MB
MiSTer_Case_V2_-_USB_Side_Wall_Digital_IO_v1.2.stl 929.5 KB
MiSTer_Case_V2_-_USB_Side_Wall_with_Audio_Port_Analog_IO.stl 1.1 MB
MiSTer_Case_V2_-_USB_Side_Wall_-_Larger_SoG_opening.stl 1 MB
MiSTer_Case_V2_-_Upper_-_Dia5.6mm_Light_Pipes__Shorter_Buttons_Analog_IO.stl 2 MB
MiSTer_Case_V2_-_Upper_-_Dia5.6mm_Light_Pipes__Shorter_Buttons_Digital_IO.stl 2 MB
MiSTer_Case_V2_-_Upper_-_Dia5.6mm_Light_Pipes__Longer_Buttons_with_Clearance_Digital_IO.stl 2.2 MB
MiSTer_Case_V2_-_Upper_-_Dia5.6mm_Light_Pipes__Longer_Buttons_with_Clearance_Analog_IO.stl 2.2 MB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora