Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Make a robot using chocube.
-
Print. Chocube panel & some accessory connectors.
-
Cut. Create DIY (user defined shape) blocks what you want. Use cutter knife.
-
Connect. Use adhesive or ChocoChips(connectors).
Make everything!!!
Create toys. Built a robot. It's container for your DIY project.
Applications: IOT, embeded , Robotics, Arduino, Raspberry Pi. , AI Board /SBC Cases , prototype, education.
Important.
Use ABS. ( No PLA . hard to cut) Fill 100%
Design files:
A. ChoCube10x10.stl
10x10 matrix plate ( size: 10cm x 10cm. it about 4 inch x 4 inch )
If you have a small 3d printer: print this panel.
B. ChoCube20x10.stl
10x20 matrix plate
If you have a large 3d printer: you can print 10x20cm panel.
(compatible with 10x10 matrix panel)
C. ChocoChip.stl
: Multi purpose component:
1. To connect user defined blocks perpendicular( vertical).
2. Put this chips inside plate holes. Create pixel arts.
D. Joint-2t.stl thickness: 2mm (easy to connect, rotating hinge ) Joint-3t.stl. thickness: 3mm ( hard connection ) : connecting cubes
